Stabilization of the swelling clay structure is attempted by intercalation of Mg(OH)2 and the development of a brucite interlayer between the clay layers. The properties of the product obtained by applying the technique, formulated as described in a previous work, are considered here. The materials used were Wyoming bentonite (USA), Fuller's Earth (UK), kaolinite, illite, lignite, and silica gels. The Mg(OH)2-clay products were examined by the methylene blue dye test, X-ray diffraction analysis (XRD), differential thermal analysis (DTA), and derivative thermogravimetry analysis (DTGA). From the results obtained it is concluded that: the Mg-hydroxide is adsorbed by swelling clays both on their external and internal surface, whereas it is adsorbed on the external surface by non-swelling clays. The internally adsorbed phase of Mg-hydroxide forms an ill-defined interlayer of brucite, retarding swelling, whereas the external phase covers the particles modifying drastically their surface properties, like the adsorption of the MB dye. The material produced after precipitation of Mg-hydroxide on swelling clays (smectites) did not re-expand on wetting or after glycolation. The adsorption of MB dye was also reduced by some 80–90%, due to coating effect, preventing the measurements of the external surface area of the clay by polar molecules. The principal forces involved in the process are believed to be physical adsorption on the external surface, along with chemisorption and some chemical bonding, mostly in the internal surface. Cementation due to crystallization and, in the long term, some pozzolanic reactions take also place. Internal adsorption of the Mg-hydroxide is postulated to be in the form of positively charged mono- and/or small polymers and it is, chiefly, diffusion controlled. Since Mg-hydroxide is internally adsorbed by swelling clays, whereas Ca-hydroxide(lime) is not, and the (Mg, Ca)-clay aggregates are more stable than the Ca-clay or the Mg-one, the combination of the two hydroxides could give better results in soil stabilization than each hydroxide alone. 相似文献
For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation from piezocone test results. However, depending on assumptions and analytical techniques, it could vary considerably, even for a specific degree of consolidation. In this paper a method is proposed to determine a consistent coefficient of consolidation by applying the concept of an optimum design technique over all ranges of the degree of consolidation. Initial excess pore pressure distribution is assumed to be capable of being obtained by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of a two-dimensional linear-uncoupled axi-symmetric consolidation analysis. The minimization of differences between measured and predicted excess pore pressure was carried out by the BFGS unconstrained optimum design algorithm with a one-dimensional golden section search technique. By analyzing numerical examples and in-situ test results, it was found that the adopted optimum design technique gives consistent and convergent results. 相似文献
The understanding of the thermo-hydro-mechanical behaviour of a clay barrier is needed for the prediction of its final in situ properties after the hydration and thermal transient in a radioactive waste repository.
As part of the CEC 1990–1994 R&D programme on radioactive waste management and storage, the CEA (Fr), CIEMAT (Sp), ENRESA (Sp), SCK · CEN (B), UPC (Sp) and UWCC (UK) have carried out a joint project on unsaturated clay behaviour (Volckaert et al., 1996). The aim of the study is to analyse and model the behaviour of a clay-based engineered barrier during its hydration phase under real repository conditions. The hydro-mechanical and thermo-hydraulic models developed in this project have been coupled to describe stress/strain behaviour, moisture migration and heat transfer. A thermo-hydraulic model has also been coupled to a geochemical code to describe the migration and formation of chemical species.
In this project, suction-controlled experiments have been performed on Boom clay (B), FoCa clay (Fr) and Almeria bentonite (Sp). The aim of these experiments is to test the validity of the interpretive model developed by Alonso and Gens (Alonso et al., 1990), and to build a database of unsaturated clay thermo-hydro-mechanical parameters. Such a database can then be used for validation exercises in which in situ experiments are simulated.
The Boom clay is a moderately swelling clay of Rupellian age. It is studied at the SCK · CEN in Belgium as a potential host rock for a radioactive waste repository. In this paper, suction-controlled experiments carried out on Boom clay by SCK · CEN are described. SCK · CEN has performed experiments to measure the relation between suction, water content and temperature and the relation between suction, stress and deformation. The applied suction-control techniques and experimental setups are detailed. The results of these experiments are discussed in the perspective of the model of Alonso and Gens. The influence of temperature on water uptake was rather small. The measured swelling-collapse behaviour can be explained by the Alonso and Gens model. 相似文献
The Saxothuringian flysch basin, on the north flank of the Central European Variscides, was fed and eventually overthrust by the northwestern, active margin of the Tepla-Barrandian terrane. Clast spectra, mineral composition and isotopic ages of detrital mica and zircon have been analyzed in order to constrain accretion and exhumation of rocks in the orogenic wedge. The earliest clastic sediments preserved are of early Famennian age (ca. 370?Ma). They are exposed immediately to the NW of the suture, and belong to the par-autochthon of the foreland. Besides ultramafic (?ophiolite) material, these rocks contain clasts derived from Early Paleozoic continental slope sediments, originally deposited at the NW margin of the Saxothuringian basin. These findings, together with the paleogeographic position of the Famennian clastics debris on the northwestern passive margin, indicate that the Saxothuringian narrow ocean had been closed by that time. Microprobe analyses of detrital hornblendes suggest derivation from the “Randamphibolit” unit, now present in the middle part of the Saxothuringian allochthon (Münchberg nappes). Detrital zircons of metamorphic rocks formed a little earlier (ca. 380?Ma) indicate rapid recycling at the tectonic front. The middle part of the flysch sequence (ca. early to middle Viséan), both in the par-autochthon and in the allochthon, contains abundant clasts of Paleozoic rocks derived from the northwestern slope and rise, together with debris of Cadomian basement, 500-Ma granitoids and 380?Ma (early Variscan) crystalline rocks. All of these source rocks were still available in the youngest part of the flysch (c. middle to late Viséan), but some clasts record, in addition, accretion of the northwestern shelf. Our findings permit deduction of minimum rates of tectonic shortening well in excess of 10–30?mm per year, and rates of exhumation of ca. 3?mm/a, and possibly more. 相似文献
Two Red Clay profiles near Xi’an and Xifeng were investigated in an attempt to determine magnetostratigraphic and palaeoclimatic
records. The results show that aeolian dust accumulation and the related East Asia palaeomonsoon system had begun by 6.5 Ma,
and it is deduced that the Tibetan Plateau had reached a significant elevation at that time. The late Tertiary palaeoclimatic
history of the Red Clay as reflected by magnetic susceptibility is reconstructed during the period of 6.5–2.5 Ma. Stepwise
increase in susceptibility of aeolian dust accumulation appears to have a close correlation to the uplift processes of the
Tibetan Plateau. The remarkable increase of aeolian dust accumulation at 3.2 Ma appears to be due to the influence of global
ice volume on the East Asia monsoon. Palaeomonsoon variation during the late Tertiary as recorded in the Red Clay sequences
from the Chinese Loess Plateau can be regarded as the product of a number of interacting factors, such as uplift of the Tibetan
Plateau, solar radiation, global ice volume, etc.
Project supported by the National Natural Science Foundation of China and the Foundation of Xi’an Laboratory of Loess and
Quaternary Geology, Chinese Academy of Sciences. 相似文献